Clear speech, and no more buzz
The old sound system at St John the Baptist Church in Moora had become impossible to use. After a new air-conditioning system was installed, power cables crossed the old microphone cables and caused a loud buzz. We upgraded the system to improve its quality and coverage, with Tannoy VLS 7 column speakers, an Allen & Heath CQ-20B digital mixer and a Behringer NX6000D amplifier with built-in DSP, and replaced the microphone cables to remove the interference.


Mains power cables can induce hum and buzz into nearby microphone cables, especially where the two run alongside or cross each other. We replaced the old microphone cabling, so the system is now clean and quiet. The Tannoy VLS 7 is a column speaker built for speech: its seven-driver design shapes coverage toward the seated congregation, which helps words carry clearly in a reverberant church. The mixer keeps control simple for volunteers, and the amplifier’s DSP lets us fine-tune delay, EQ and limiting to suit the building.
Technical info
Hum and buzz usually come from mains power cables inducing noise into audio cables. Balanced, shielded microphone cable rejects most of it, and keeping power and audio cables apart, or crossing them at right angles when they must meet, keeps the rest out. The VLS 7 uses Tannoy’s FAST (Focussed Asymmetrical Shaping Technology), which aims more of the sound downward and toward the seated area than a conventional column, so more sound lands on the listeners and less on the ceiling. The amplifier’s DSP adds delay, EQ and limiting, so the system can be tuned to the building and protected from overload.


